DynaVap popped onto the portable vaporizer scene back in 2015 and introduced consumers to the DynaVap VapCap vaporizer, which made it easier for consumers to vape dry herbs. Their initial launch was a success because DynaVap vaporizers are straightforward to use. They combine the vape style experience using the cigarette technique for the modern enthusiast. But using a DynaVap vaporizer can be foreign to beginners or anyone who’s never used a DynaVap VapCap, so let’s go over some tips and tricks that can help you get familiar with the DynaVap M 2021 VapCap vaporizer, and how to use the DynaTec Apollo 2 Induction Heater to heat up your VapCap faster.
How To Use The DynaVap M 2021 VapCap
While every DynaVap VapCap vaporizer is unique, they all function in the same manner as they have the same analog design and VapCap on one end. The DynaVap M 2021 is DynaVap’s 5th iteration of their signature vape and is designed for anyone looking for an easy-to-use, manually controlled vape that’s practically indestructible. The design is simple, yet produces tasty, reliable vapor when used correctly. It’s also the perfect “one-hitter” and a great choice if you’re looking to vape while you’re off the grid. Let’s dive deeper and give you a closer look at how to operate the M 2021 VapCap vaporizer.
Using the DynaVap VapCap M 2021 is easy and there isn’t much you need to do to start vaping because the M 2021 comes assembled and is batteryless. The first thing you want to do after you unbox the vaporizer is remove the VapCap to expose the chamber. Then, grab your preferred choice of dry herbs and ground to a fine consistency. Fill the chamber and place the cap back on. The tip comes with a 2 position “adjust-a-bowl”, so you can fully or half load the DynaVap tip with herbs.
After your material is loaded, it’s time to heat the cap. Aim your lighter, torch, or other external heating sources towards the middle of the cap for even heating and rotate the DynaVap M 2021 360 degrees, exposing the flame to the entire VapCap. Once it’s ready you’ll hear DynaVap’s famous *click* sound, letting you know it’s time to inhale. You’ll know you are below vaping temperature when you hear a second click, also known as the cooldown click.
Tip: don’t reheat the VapCap 2021 M without hearing the second click to avoid burning your dry herbs.
Similar to a battery vaporizer, the DynaVap M 2021 VapCap is a great way to experiment with different vapor flavors. By heating it at varying temperatures, angles, and places for the best vapor.
How To Use The DynaTec Apollo 2 Induction Heater
The Apollo 2 is a great addition to any VapCap session, as it lets you ditch the torch while giving you consistent vapor draws, which is great for beginners because using a torch has a learning curve. The Apollo 2 is the best option for at-home users and is a great desk companion. It’s also about the size of the Craft+ vaporizer, so it’s portable and can fit in just about any bag or purse.
Setting Up The Apollo 2 VapCap Induction Heater
Start by plugging in the Apollo 2 VapCap Induction Heater into a wall socket to turn on the heater. Grab your M 2021 VapCap and press it into the heating chamber until you see the red light turn on. Leave the vaporizer in for five to eights seconds, or until you hear a click!
This induction heater has an automatic 15 second shutoff heating time to avoid burning your dry herbs or damaging the VapCap. If you’re looking for more flavorful, low-temperature hits remove the VapCap for a second before it clicks. For thicker, potent draws we suggest you hold the VapCap in for a second more after the click, just don’t hold it for too long. The Apollo 2 also comes with a one-year manufacturer’s warranty as a testament to DynaVap’s commitment to producing quality products.
Conclusion
Both the DynaVap M 2021 and Apollo 2 Induction Heater are great options for all experience levels. We hope this helped you learn how to use a DynaVap vaporizer, so you can enjoy your session and produce flavorful vapor OR voluminous clouds!
